The question is not only whether the tub fits through the gate. A removal route includes the shell, detached panels, turns, steps, overhead clearance, and a safe place to stage material.
Finish the utility work first
Drain the tub under local rules. Have electrical, gas, and hard-plumbed connections disconnected safely. A breaker switched off is not a substitute for confirming the equipment is isolated.
Measure the narrowest point
Record gate width, but also measure tight turns, patio passages, deck openings, eaves, and the space between landscaping or mechanical equipment.
Show built-in framing
For an in-deck tub, photograph the framing from more than one side. Removal can expose edges that need protection or later repair.
Remove chemicals from the work zone
Store sanitizers, acids, and other treatment products away from the demolition load. Ask the responsible local program how to handle them.
Use the checklist
- Tub drained
- Power/gas/plumbing disconnected
- Gate and turns measured
- Deck framing photographed
- Chemicals removed
- Truck approach available
What to send with an estimate request
Include one wide photo, close photos of connections and damage, rough dimensions, the narrowest access measurement, utility status, and a note about concrete or anchors. Keep hazardous materials out of ordinary debris.